2 November 2026
Large Format Printing News & Tips
A new UV flatbed for Staffordshire Signs & Graphics, fresh installs at PECO and Only Boards, and large-format kit from Durst and Agfa at Viscom 2026 in Milan — plus a practical look at large format print lamination: when it’s worth it, and which finish to choose.
In the news this week
Staffordshire Signs & Graphics installs a 3.3m UV flatbed
The UK signage firm has taken delivery of a 3.3-metre China Print Supplies UK DLI-3325 flatbed running Ricoh Gen 6 printheads, now going through fine-tuning and training ahead of full commissioning — one of several wide-format investments reported in the trade press over the past fortnight.
PECO and Only Boards add new kit from China Print Supplies and CMYUK
Display and signage business PECO has chosen a SinoColor UV printer from China Print Supplies, while point-of-sale specialist Only Boards has invested in new print and finishing technology from CMYUK — both signs UK print shops are still backing capacity and finishing for 2027.
Durst and Agfa show large-format hardware at Viscom 2026, Milan
At Viscom 2026 (28–29 October) in Milan, Durst gave its P5 350 CORE hybrid press its first showing to the Italian market, reporting around ten systems sold since launching at FESPA earlier this year, while Agfa exhibited its 3.3m Jeti Bronco H3300 HS UV flatbed, rated up to 450 m²/h.
Tips: large format print lamination – gloss, matte, or skip it?
With finishing kit in more than one of this week’s stories, it felt like a good moment to cover a question we get asked constantly: should this job be laminated, and with what? Large format print lamination is one of the easiest ways to add years to an outdoor print — but it’s also easy to spec unnecessarily, or choose the wrong finish. Here’s how we’d think it through:
- Match the laminate to the environment, not your default finish. Outdoor signage, vehicle wraps and anything handled or weathered benefit most from an overlaminate protecting against UV fade, abrasion and moisture. Short-term indoor POS and exhibition graphics usually don’t need it — you’d be adding cost and lead time for durability the print will never use.
- Cold or hot laminating changes what you can run. Cold (pressure-sensitive) laminators are simpler and safer for heat-sensitive banner and vinyl media, and suit low to medium volumes well. Hot (thermal) lamination gives a stronger bond and handles higher volumes, but needs the temperature matched carefully to the substrate to avoid curling or silvering.
- Gloss and matte do different jobs, not just different looks. Gloss sharpens colour and contrast for vibrant retail and POS graphics, but shows fingerprints and glares under strong lighting. Matte or textured laminate cuts glare and hides handling marks — usually the better call for wall graphics and anything under shop or gallery lighting.
- Mind the mil thickness. A thin 1.5–2 mil laminate is fine for short-term indoor use. For vehicle wraps, floor graphics or anything handled or weathered, step up to 3–4 mil or a specialist protective film — the extra cost is small next to a reprint.
- Check whether the ink and media are already doing the job. Latex and UV-cured prints are already reasonably UV-stable and scratch-resistant off the printer. Before quoting lamination as standard, check whether your ink and substrate already make it a nice-to-have rather than a necessity.
From Design Supply
If you’re weighing up laminate choices for an upcoming job, or looking at new flatbed or finishing kit, get in touch — we supply the printers, ink, media and laminators covered above and can talk you through what’s right for your floor.
We’re now in our 36th year supplying large format printer solutions and have sold over 7,000 printers to architects, photographers, sign makers and print businesses across the UK — more about us here.
Get in touch for consumables, service or advice — we’re here to help.