Designed for use with hot
and cold roll fed laminators, our lamination
films and mount films are ideal for the finishing
of graphics produced on wide format printers.
The range comprises low-melt encapsulation
films and cold, pressure sensitive lamination
films at a price/performance demanded by today’s
competitive market. All the popular weights
and finishes are covered with some specialised
films added for good measure.
Cold Lamination Film
Also known as 'cold seal'
or 'pressure sensitive lamination film', our
PVC cold lamination films are designed to
work through roll fed laminators at room temperature
using only the roller pressure to adhere them
to the print surface.Each film has a strong,
solvent acrylic adhesive so it can be used
for both indoor and outdoor applications.
Finishes include two types of Matt, a Satin
and a Gloss.
Options available:
Textured Matt Laminate 125mic; Heavy
Textured Matt Laminate 225mic; Satin Laminate
100mic; Glossy Laminate 100mic.
Sizes available:
880mm
to 1520mm rolls.
Hot
Encapsulation Film
The range comprises polyester
films in gauges from 75mic to 250mic and available
in gloss and matt with a low melt, heat activated
adhesive. The films are easy to handle when
cold as the glue only becomes active when
heated to 90C or more through heated rollers.
Encapsulation is ideal for enhancing colours
on matt coated media, protecting prints from
abrasion and sealing against water penetration.
Options available:
Matt Encapsulation Film 75mic; Matt
Encapsulation Film 125mic; Gloss Encapsulation
Film 75mic; Gloss Encapsulation Film 125mic;
Gloss Encapsulation Film 250mic.
Sizes available:
635mm
to 1295mm rolls.
Mount Film
Using a strong polyester film
coated both sides with adhesive, our mount
films give you protection against shrinkage
and a choice of adhesives for all the popular
mounting applications.
Options available:
Mount Film; Low Tack Mount Film.
Sizes available:
1040mm
to 1300mm rolls.
Get
a quote>>
